Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of StarFlex™ 7360-1000 - TPE - Star Thermoplastics

Material Data Center offers the following functions for StarFlex™ 7360-1000:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Starflex datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
机械性能价值单位Test Standard
ASTM数据
300%伸长率时的模量 2.92 MPa ASTM D 412
邵氏硬度A 60 - ASTM D 2240
撕裂强度 32.9 kN/m ASTM D 624
拉伸强度 9.84 MPa ASTM D 412
断裂伸长率 792 % ASTM D 412
其它性能价值单位Test Standard
密度 1150 kg/m³ ASTM D 792
典型数据
供货形式
自然色
特殊性能
经耐紫外线处理的/耐气候的
特征
好粘附性能
Certifications
可食品接触的, FDA 21 CFR认证
应用
汽车, 通用, 运动器械
地区供应
北美
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.