Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ubesta 3035 LU 1 - PA12 - UBE

Material Data Center offers the following functions for Ubesta 3035 LU 1:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Ubesta datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ISO数据
熔融指数, MFI 1 g/10min ISO 1133
温度 235 °C -
负载 2.16 kg -
模塑收缩率, 平行 0.7 % ISO 294-4, 2577
模塑收缩率, 垂直 1.5 % ISO 294-4, 2577
ASTM数据
熔融指数, MFI 1.3 g/10min ASTM D 1238
温度 235 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
ISO数据
屈服应力 50 MPa ISO 527
屈服伸长率 4 % ISO 527
断裂伸长率 >50 % ISO 527
弯曲模量, 23°C 1500 MPa ISO 178
简支梁缺口冲击强度, +23°C 20 kJ/m² ISO 179/1eA
肖氏硬度D 79 - ISO 7619-1
洛克硬度 R 107 - ISO 2039-2
ASTM数据
屈服应力 46 MPa ASTM D 638
断裂拉伸强度 56 MPa ASTM D 638
断裂伸长率 250 % ASTM D 638
弯曲模量 1590 MPa ASTM D 790
弯曲强度 61 MPa ASTM D 790
洛克硬度 R 112 - ASTM D 785
悬臂梁缺口冲击强度, 1/8 in 86.5 J/m ASTM D 256
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 178 °C ISO 11357-1/-3
热变形温度, 1.80 MPa 45 °C ISO 75-1/-2
热变形温度, 0.45 MPa 105 °C ISO 75-1/-2
线性热膨胀系数, 平行 120 E-6/K ISO 11359-1/-2
ASTM数据
DTUL @ 66 psi 149 °C ASTM D 648
熔点 178 °C ASTM D 3418
电性能价值单位Test Standard
ISO数据
体积电阻率 1E12 Ohm*m IEC 62631-3-1
其它性能价值单位Test Standard
密度 1020 kg/m³ ISO 1183
密度 1020 kg/m³ ASTM D 792
典型数据
加工方法
其它挤出成型, 表面涂层
供货形式
黑色
特殊性能
经热稳处理的/耐热的
地区供应
北美, 欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.