Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultradur® B 4300 GM42 - PBT-(GF+MF)30 - BASF

Material Data Center offers the following functions for Ultradur® B 4300 GM42:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, parameters for material models, CAE Interfaces

Check here, which other Ultradur datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 模塑测量的特殊性能 - 加工推荐（注塑） - 函数
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Injection molding grade, containing a glass fiber and mineral reinforcement, for parts with good surface finish and stiffness, as well as low warpage tendency (e.g.housings).

Abbreviated designation according to ISO 1043: PBT-GF20 M10
加工/物理特性价值单位Test Standard
ISO数据
熔体体积流动速度, MVR 17 cm³/10min ISO 1133
温度 250 °C -
载荷 2.16 kg -
机械性能价值单位Test Standard
ISO数据
拉伸模量 7900 MPa ISO 527
断裂应力 105 MPa ISO 527
断裂伸长率 2.7 % ISO 527
拉伸蠕变模量, 1000h 4500 MPa ISO 899-1
无缺口简支梁冲击强度, +23°C 45 kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C 43 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 4.5 kJ/m² ISO 179/1eA
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 223 °C ISO 11357-1/-3
热变形温度, 1.80 MPa 195 °C ISO 75-1/-2
热变形温度, 0.45 MPa 220 °C ISO 75-1/-2
1.5mm名义厚度时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 1.5 mm -
厚度为h时的燃烧性 HB class IEC 60695-11-10
测试用试样的厚度 0.8 mm -
燃烧性－氧指数 21 % ISO 4589-1/-2
电性能价值单位Test Standard
ISO数据
相对介电常数., 100Hz 3.8 - IEC 62631-2-1
相对介电常数., 1MHz 3.8 - IEC 62631-2-1
介质损耗因子, 100Hz 12 E-4 IEC 62631-2-1
介质损耗因子, 1MHz 150 E-4 IEC 62631-2-1
体积电阻率 >1E13 Ohm*m IEC 62631-3-1
表面电阻率 1E13 Ohm IEC 62631-3-2
相对漏电起痕指数 300 - IEC 60112
其它性能价值单位Test Standard
吸水性 0.4 % 类似ISO 62
吸湿性 0.2 % 类似ISO 62
密度 1550 kg/m³ ISO 1183
模塑测量的特殊性能价值单位Test Standard
ISO数据
粘数 101 cm³/g ISO 307, 1157, 1628
加工推荐（注塑）价值单位Test Standard
预干燥-温度 80 - 120 °C -
预干燥-时间 4 h -
加工湿度 ≤0.04 % -
注塑熔体温度 250 - 275 °C -
模具温度 60 - 90 °C -
函数
粘度－剪切速度 , Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
剪切应力－剪切速度 , Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
应力－应变. , Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
正割模量－应变. , Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
应力－应变(等时的) 23°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
蠕变模量－时间. 23°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
蠕变曲线 23°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
应力－应变(等时的) 40°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
蠕变模量－时间. 40°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
蠕变曲线 40°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
应力－应变(等时的) 60°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
蠕变模量－时间. 60°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
蠕变曲线 60°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
应力－应变(等时的) 90°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
蠕变模量－时间. 90°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
蠕变曲线 90°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
应力－应变(等时的) 120°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
蠕变模量－时间. 120°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
蠕变曲线 120°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
应力－应变(等时的) 160°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
蠕变模量－时间. 160°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
蠕变曲线 160°C, Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
拉伸模量－温度 , Ultradur® B 4300 GM42, PBT-(GF+MF)30, BASF
典型数据
加工方法
注塑
供货形式
粒料
添加剂
润滑剂
特殊性能
经光稳处理的/耐光的, 经耐紫外线处理的/耐气候的, 经热稳处理的/耐热的
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
其他信息
注塑成型
PREPROCESSING
Pre/Post-processing, max. allowed water content: .04 %
Pre/Post-processing, Pre-drying, Temperature: 80 - 120 °C
Pre/Post-processing, Pre-drying, Time: 4 h

PROCESSING
injection molding, Melt temperature, range: 250 - 275 °C
injection molding, Melt temperature, recommended: 250 °C
injection molding, Mold temperature, range: 60 - 90 °C
injection molding, Mold temperature, recommended: 80 °C
耐化学性
酸类
醋酸 (5g/100g) (23°C)
柠檬酸溶液 (10g/100g) (23°C)
乳酸 (10g/100g) (23°C)
碱类
氢氧化钠溶液 (35g/100g) (23°C)
氨水(氢氧化铵) (10g/100g) (23°C)
醇类
异丙醇 (23°C)
甲醇 (23°C)
乙醇 (23°C)
碳氢化合物
正乙烷 (23°C)
甲苯 (23°C)
异辛烷 (23°C)
酮类
丙酮 (23°C)
醚类
(二)乙醚 (23°C)
矿物油
SAE 10W40号多效润滑油 (23°C)
SAE 10W40号多效润滑油 (130°C)
标准燃油
柴油(优先使用F类ISO 1817液体) (23°C)
盐溶液
碳酸钠溶液 (2g/100g) (23°C)
其它
乙酸乙酯 (23°C)
水 (23°C)
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.