Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Ultraform® N2320 003 - POM - BASF

Check here, which other Ultraform datasheets, application examples or technical articles are available in Material Data Center

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑） - 函数

Any use of this information falls under the rules of our disclaimer.

加工/物理特性	价值	单位	Test Standard
ISO数据
熔体体积流动速度, MVR	7.5	cm³/10min	ISO 1133
温度	190	°C	-
载荷	2.16	kg	-
模塑收缩率, 平行	2.1	%	ISO 294-4, 2577
模塑收缩率, 垂直	2.1	%	ISO 294-4, 2577

机械性能	价值	单位	Test Standard
ISO数据
拉伸模量	2700	MPa	ISO 527
屈服应力	65	MPa	ISO 527
屈服伸长率	9.4	%	ISO 527
名义断裂伸长率	27	%	ISO 527
拉伸蠕变模量, 1000h	1400	MPa	ISO 899-1
简支梁冲击强度, +23°C	210	kJ/m²	ISO 179/1eU
简支梁冲击强度, -30°C	190	kJ/m²	ISO 179/1eU
简支梁缺口冲击强度, +23°C	6	kJ/m²	ISO 179/1eA
简支梁缺口冲击强度, -30°C	5.5	kJ/m²	ISO 179/1eA
悬臂梁缺口冲击强度, +23°C	6	kJ/m²	ISO 180/1A
悬臂梁缺口冲击强度	5.5	kJ/m²	ISO 180/1A
悬臂梁缺口冲击强度 - 温度	-30	°C	-
球压硬度	140	MPa	ISO 2039-1

热性能	价值	单位	Test Standard
ISO数据
熔融温度, 10°C/min	167	°C	ISO 11357-1/-3
热变形温度, 1.80 MPa	100	°C	ISO 75-1/-2
线性热膨胀系数, 平行	110	E-6/K	ISO 11359-1/-2
1.5mm名义厚度时的燃烧性	HB	class	IEC 60695-11-10
测试用试样的厚度	1.6	mm	-

电性能	价值	单位	Test Standard
ISO数据
相对介电常数, 1MHz	3.8	-	IEC 62631-2-1
介质损耗因子, 1MHz	50	E-4	IEC 62631-2-1
体积电阻率	1E13	Ohm*m	IEC 62631-3-1
表面电阻率	1E13	Ohm	IEC 62631-3-2
相对漏电起痕指数	600	-	IEC 60112

其它性能	价值	单位	Test Standard
吸水性	0.8	%	类似ISO 62
吸湿性	0.2	%	类似ISO 62
密度	1400	kg/m³	ISO 1183
Bulk density	850	kg/m³	-

加工推荐（注塑）	价值	单位	Test Standard
注塑熔体温度	190 - 230	°C	-
模具温度	60 - 120	°C	-

函数

典型数据

加工方法

注塑

供货形式

粒料

应用

汽车

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.