View Datasheet in other language

E-mail to a friend

Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAKEEP® 4000 FC30 - (PEEK+PTFE)-(CF+CD)30 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAKEEP® 4000 FC30:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestakeep datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:

加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 函数

Any use of this information falls under the rules of our disclaimer.

材料文字说明

Carbon fiber-reinforced, graphite and PTFE-filled polyether ether ketone

VESTAKEEP® 4000 FC30 is a carbon fiber reinforced, graphite and PTFE-filled polyether ether ketone for injection molding. Parts made of this resin can be used for bearing bushing or gearbox parts due to the selflubricating effect.

The semi-crystalline polymer features superior mechanical, thermal, and chemical resistance. Parts made from VESTAKEEP® 4000 FC30 are of low flammability.

VESTAKEEP® 4000 FC30 can be processed by common injection molding machines for thermoplastics.

We recommend a melt temperature between 370°C and 380°C during the injection molding process. If temperatures exceed 380°C, toxic gases can be released. Adequate ventilation and protective equipment must be provided. The mold temperature should be within a range of 160°C to 200°C, preferably 180°C.

VESTAKEEP® 4000 FC30 is supplied as cylindrical pellets in 25 kg boxes with moisture-proof polyethylene liners.

Inside the original and undamaged packaging, the product has a shelf life of at least 2 years when stored in dry rooms at temperatures not exceeding 30°C.

Pigmentation may affect values.

For information about processing of VESTAKEEP® 4000 FC30, please follow the general recommendations in our brochure “VESTAKEEP® PEEK Processing Guidelines“.

FOR FURTHER INFORMATION PLEASE CONTACT US AT EVONIK-HP@EVONIK.COM OR VISIT OUR PRODUCT AT WWW.INDUSTRIAL.VESTAKEEP.COM

加工/物理特性

价值

单位

Test Standard

ISO数据

熔体体积流动速度, MVR

cm³/10min

ISO 1133

温度

400

°C

载荷

21.6

模塑收缩率, 平行

0.2

ISO 294-4, 2577

模塑收缩率, 垂直

0.4

ISO 294-4, 2577

机械性能

价值

单位

Test Standard

ISO数据

拉伸模量

12500

MPa

ISO 527

断裂应力

160

MPa

ISO 527

断裂伸长率

ISO 527

无缺口简支梁冲击强度, +23°C

kJ/m²

ISO 179/1eU

Type of failure

简支梁冲击强度, -30°C

kJ/m²

ISO 179/1eU

Type of failure

简支梁缺口冲击强度, +23°C

kJ/m²

ISO 179/1eA

Type of failure

简支梁缺口冲击强度, -30°C

kJ/m²

ISO 179/1eA

Type of failure

热性能

价值

单位

Test Standard

ISO数据

熔融温度, 10°C/min

340

°C

ISO 11357-1/-3

热变形温度, 1.80 MPa

310

°C

ISO 75-1/-2

热变形温度, 0.45 MPa

330

°C

ISO 75-1/-2

维卡软化温度, B

335

°C

ISO 306

线性热膨胀系数, 平行

E-6/K

ISO 11359-1/-2

1.5mm名义厚度时的燃烧性

V-0

class

IEC 60695-11-10

测试用试样的厚度

1.5

Yellow Card 现存

是的

厚度为h时的燃烧性

V-0

class

IEC 60695-11-10

测试用试样的厚度

0.8

Yellow Card 现存

是的

燃烧性－氧指数

ISO 4589-1/-2

电性能

价值

单位

Test Standard

ISO数据

相对介电常数., 100Hz

5.9

IEC 62631-2-1

相对介电常数., 1MHz

4.9

IEC 62631-2-1

介质损耗因子, 100Hz

600

E-4

IEC 62631-2-1

介质损耗因子, 1MHz

200

E-4

IEC 62631-2-1

体积电阻率

100000

Ohm*m

IEC 62631-3-1

表面电阻率

1000000

Ohm

IEC 62631-3-2

其它性能	价值	单位	Test Standard
吸水性	0.4	%	类似ISO 62
密度	1450	kg/m³	ISO 1183

函数

拉伸模量－温度 , VESTAKEEP® 4000 FC30, (PEEK+PTFE)-(CF+CD)30, Evonik

典型数据

加工方法

注塑, 其它挤出成型

供货形式

粒料

地区供应

北美, 欧洲, 亚太, 中南美洲, 中东/非洲

耐化学性

酸类
	醋酸 (5g/100g) (23°C)
	柠檬酸溶液 (10g/100g) (23°C)
	盐酸 (36g/100g) (23°C)
	硝酸 (40g/100g) (23°C)
	硫酸 (5g/100g) (23°C)
	铬酸溶液 (40g/100g) (23°C)
碱类
	氢氧化钠溶液 (35g/100g) (23°C)
	氢氧化钠溶液 (1g/100g) (23°C)
	氨水(氢氧化铵) (10g/100g) (23°C)
醇类
	异丙醇 (23°C)
	甲醇 (23°C)
	乙醇 (23°C)
碳氢化合物
	正乙烷 (23°C)
	甲苯 (23°C)
	异辛烷 (23°C)
酮类
	丙酮 (23°C)
醚类
	(二)乙醚 (23°C)
矿物油
	SAE 10W40号多效润滑油 (23°C)
	绝缘油 (23°C)
标准燃油
	不含酒精的标准燃油(优先使用C类ISO 1817 燃油) (23°C)
	含酒精的标准燃油(优先使用4号ISO 1817 燃油) (23°C)
	柴油(优先使用F类ISO 1817液体) (23°C)
盐溶液
	氯化钠溶液(10g/100g) (23°C)
	次氯化钠溶液 (10g/100g) (23°C)
	碳酸钠溶液 (20g/100g) (23°C)
	碳酸钠溶液 (2g/100g) (23°C)
	氯化锌溶液 (50g/100g) (23°C)
其它
	乙酸乙酯 (23°C)
	过氧化氢 (23°C)
	乙二醇水溶液 (50g/100g) (108°C)
	水 (23°C)
	去离子水 (90°C)

权利义务的法律声明

Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.

Created: Source: www.materialdatacenter.com

Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.