Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTAKEEP® i4 3DF-T - PEEK - Evonik Operations GmbH

Material Data Center offers the following functions for VESTAKEEP® i4 3DF-T:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vestakeep datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性干 / 已调节单位Test Standard
ISO数据
熔体体积流动速度, MVR 12 / * cm³/10min ISO 1133
温度 380 / * °C -
载荷 5 / * kg -
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 3500 / - MPa ISO 527
拉伸强度 94 / - MPa ISO 527
屈服应力 94 / - MPa ISO 527
屈服伸长率 5 / - % ISO 527
断裂应力 76 / - MPa ISO 527
简支梁冲击强度, +23°C N / - kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C N / - kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 9.1 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
简支梁缺口冲击强度, -30°C 6 / - kJ/m² ISO 179/1eA
Type of failure C / - - -
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 338 / * °C ISO 11357-1/-3
玻璃化转变温度, 10°C/min 152 / * °C ISO 11357-1/-2
热变形温度, 1.80 MPa 150 / * °C ISO 75-1/-2
热变形温度, 0.45 MPa 205 / * °C ISO 75-1/-2
维卡软化温度, A 335 / * °C ISO 306
维卡软化温度, B 305 / * °C ISO 306
厚度为h时的燃烧性 V-0 / * class IEC 60695-11-10
测试用试样的厚度 3.2 / * mm -
ASTM数据
熔点 338 °C ASTM D 3418
其它性能干 / 已调节单位Test Standard
密度 1300 / - kg/m³ ISO 1183
密度 1300 kg/m³ ASTM D 792
典型数据
加工方法
Additive Manufacturing
供货形式
单纤纺丝, 自然色
特殊性能
经热稳处理的/耐热的, Opaque
特征
热稳定性
耐化学试剂
耐酸性, 耐碱性, 通用耐化学性, 耐溶剂性, 耐油脂性, 水解稳定, 耐油性, 抗氧化性
应用
药物
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.