Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of VESTOSINT® 1141 white 9.1123 - PA12 - Evonik Operations GmbH

Material Data Center offers the following functions for VESTOSINT® 1141 white 9.1123:
unit conversion, PDF datasheet print, comparison with other plastics

Check here, which other Vestosint datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
机械性能 - 热性能 - 电性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
机械性能价值单位Test Standard
ISO数据
屈服应力 42 MPa ISO 527
屈服伸长率 6 % ISO 527
断裂伸长率 100 % ISO 527
肖氏硬度D 75 - ISO 7619-1
球压硬度 101 MPa ISO 2039-1
热性能价值单位Test Standard
ISO数据
熔融温度, 10°C/min 176 °C ISO 11357-1/-3
线性热膨胀系数, 平行 104 E-6/K ISO 11359-1/-2
电性能价值单位Test Standard
ISO数据
体积电阻率 1E12 Ohm*m IEC 62631-3-1
介电强度 85 kV/mm IEC 60243-1
其它性能价值单位Test Standard
吸湿性 0.5 % 类似ISO 62
密度 1060 kg/m³ ISO 1183
Bulk density 520 kg/m³ -
典型数据
加工方法
表面涂层
供货形式
粉料, 白色
Certifications
可食品接触的
地区供应
欧洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.