Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vistamaxx™ 6202 - TPO - ExxonMobil Chemical

Material Data Center offers the following functions for Vistamaxx™ 6202:
unit conversion, PDF datasheet print

Check here, which other Vistamaxx datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能
Any use of this information falls under the rules of our disclaimer.
加工/物理特性价值单位Test Standard
ASTM数据
熔融指数, MFI 9.1 g/10min ASTM D 1238
温度 190 °C -
负载 2.16 kg -
机械性能价值单位Test Standard
Other Standards[S]
断裂拉伸强度 5.52 MPa ExxonMobil Method
断裂伸长率 800 % ExxonMobil Method
100%伸长率时的模量 2.21 MPa ExxonMobil Method
300%伸长率时的模量 0.848 MPa ExxonMobil Method
邵氏硬度A 64 - ExxonMobil Method
撕裂强度 32 kN/m ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
热性能价值单位Test Standard
Other Standards[S]
维卡温度 45 °C ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
其它性能价值单位Test Standard
Other Standards[S]
密度 862 kg/m³ ExxonMobil Method
S: These properties are reported by the producer according standards that are different to our defaults.
典型数据
加工方法
注塑, 薄膜挤出成型, 异型材挤出成型, 片材挤出成型, 压延成型
供货形式
粒料
特殊性能
高冲击韧性的/经抗冲改性的
特征
共混树脂, 好粘附性能, 可热封的
耐化学试剂
通用耐化学性
Certifications
RoHS
应用
包装
地区供应
北美, 欧洲, 亚太, 中南美洲, 中东/非洲
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.