Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® R533H NT - PA66-GF33 - Ascend

Material Data Center offers the following functions for Vydyne® R533H NT:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 电性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Vydyne R533H NT is a general purpose, 33% glass-filled, heat-stabilized PA66 based resin designed for injection molding applications. R533H NT offers improved flow with a natural surface finish and maintains the excellent resistance typical of PA66 in chemicals, machine and motor oils, solvents, and gasoline.
加工/物理特性干 / 已调节单位Test Standard
ISO数据
模塑收缩率, 平行 0.4 / * % ISO 294-4, 2577
模塑收缩率, 垂直 0.9 / * % ISO 294-4, 2577
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 10600 / 7900 MPa ISO 527
断裂应力 205 / 145 MPa ISO 527
断裂伸长率 3 / 5 % ISO 527
弯曲模量, 23°C 10200 / 6500 MPa ISO 178
弯曲强度 290 / 200 MPa ISO 178
无缺口简支梁冲击强度, +23°C 80 / 90 kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C 70 / 85 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 11 / 14 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 10 / 12 kJ/m² ISO 179/1eA
悬臂梁缺口冲击强度, +23°C 12 / 14 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 10 / 12 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 - 温度 -30 °C -
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 260 / * °C ISO 11357-1/-3
热变形温度, 1.80 MPa 250 / * °C ISO 75-1/-2
热变形温度, 0.45 MPa 260 / * °C ISO 75-1/-2
线性热膨胀系数, 平行 21 / * E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 110 / * E-6/K ISO 11359-1/-2
1.5mm名义厚度时的燃烧性 HB / * class IEC 60695-11-10
测试用试样的厚度 1.5 / * mm -
厚度为h时的燃烧性 HB / * class IEC 60695-11-10
测试用试样的厚度 0.8 / * mm -
灼热丝燃烧指数 (GWFI) 725 °C IEC 60695-2-12
GWFI - 测试用试样厚度 0.75 mm -
灼热丝燃烧指数 (GWFI) 700 °C IEC 60695-2-12
GWFI - 测试用试样厚度 1.5 mm -
灼热丝燃烧指数 (GWFI) 875 °C IEC 60695-2-12
GWFI - 测试用试样厚度 3 mm -
灼热丝引燃温度 (GWIT) 750 °C IEC 60695-2-13
GWIT - 测试用试样厚度 0.75 mm -
灼热丝引燃温度 (GWIT) 725 °C IEC 60695-2-13
GWIT - 测试用试样厚度 1.5 mm -
灼热丝引燃温度 (GWIT) 750 °C IEC 60695-2-13
GWIT - 测试用试样厚度 3 mm -
ASTM数据
UL94 燃烧性 HB - UL 94
测试厚度 0.75 mm -
电性能干 / 已调节单位Test Standard
ISO数据
体积电阻率 1E11 / - Ohm*m IEC 62631-3-1
介电强度 20 / - kV/mm IEC 60243-1
相对漏电起痕指数 325 / - - IEC 60112
ASTM数据
耐电弧性 90 / - s ASTM D 495
其它性能干 / 已调节单位Test Standard
吸水性 0.8 / * % 类似ISO 62
吸湿性 1.7 / * % 类似ISO 62
密度 1400 / - kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
预干燥-温度 80 °C -
预干燥-时间 4 h -
注塑熔体温度 285 - 305 °C -
模具温度 65 - 95 °C -
1区 280 - 310 °C -
2区 280 - 310 °C -
3区 280 - 310 °C -
喷嘴温度 280 - 310 °C -
典型数据
加工方法
注塑
供货形式
粒料, 自然色
添加剂
润滑剂, 脱模助剂
特殊性能
经热稳处理的/耐热的
耐化学试剂
通用耐化学性, 耐溶剂性, 耐油性
Certifications
可食品接触的, 10/2011认证, FDA 21 CFR认证
应用
汽车, 通用
地区供应
北美, 欧洲, 亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.