Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Vydyne® R862H BK0676 - PA66-(GF+MX) - Ascend

Material Data Center offers the following functions for Vydyne® R862H BK0676:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Vydyne datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
加工/物理特性 - 机械性能 - 热性能 - 其它性能 - 加工推荐（注塑）
Any use of this information falls under the rules of our disclaimer.
材料文字说明
Vydyne R862H BK0676 is a general purpose, glass-fiber, mineral-reinforced, heat stabilized PA66 resin. Available in black, this product is also lubricated for improved flow and offers superior surface appearance. R862H BK0676 can be successfully used in a wide range of injection-molding engineering applications. Typical parts include lower cowl top covers, radiator shrouds, fans and mirror brackets, cylinder head covers.
加工/物理特性干 / 已调节单位Test Standard
ISO数据
模塑收缩率, 平行 0.4 / * % ISO 294-4, 2577
模塑收缩率, 垂直 1.1 / * % ISO 294-4, 2577
机械性能干 / 已调节单位Test Standard
ISO数据
拉伸模量 10500 / 7800 MPa ISO 527
断裂应力 149 / 98 MPa ISO 527
断裂伸长率 2.2 / 2.2 % ISO 527
弯曲模量, 23°C 10800 / 5600 MPa ISO 178
弯曲强度 220 / 120 MPa ISO 178
无缺口简支梁冲击强度, +23°C 49 / 48 kJ/m² ISO 179/1eU
简支梁冲击强度, -30°C 46 / 50 kJ/m² ISO 179/1eU
简支梁缺口冲击强度, +23°C 6 / 10 kJ/m² ISO 179/1eA
简支梁缺口冲击强度, -30°C 6 / 6 kJ/m² ISO 179/1eA
悬臂梁缺口冲击强度, +23°C 7 / 11 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 6 / 7 kJ/m² ISO 180/1A
悬臂梁缺口冲击强度 - 温度 -30 °C -
热性能干 / 已调节单位Test Standard
ISO数据
熔融温度, 10°C/min 260 / * °C ISO 11357-1/-3
热变形温度, 1.80 MPa 234 / * °C ISO 75-1/-2
热变形温度, 0.45 MPa 255 / * °C ISO 75-1/-2
线性热膨胀系数, 平行 18.5 / * E-6/K ISO 11359-1/-2
线性热膨胀系数, 垂直 66.9 / * E-6/K ISO 11359-1/-2
其它性能干 / 已调节单位Test Standard
吸水性 1.5 / * % 类似ISO 62
吸湿性 1.5 / * % 类似ISO 62
密度 1470 / - kg/m³ ISO 1183
加工推荐（注塑）价值单位Test Standard
预干燥-温度 80 °C -
预干燥-时间 4 h -
注塑熔体温度 285 - 305 °C -
模具温度 65 - 95 °C -
1区 280 - 310 °C -
2区 280 - 310 °C -
3区 280 - 310 °C -
喷嘴温度 280 - 310 °C -
典型数据
加工方法
注塑
供货形式
粒料, 黑色
添加剂
润滑剂
特殊性能
经热稳处理的/耐热的
特征
防蠕变
耐化学试剂
通用耐化学性, 耐溶剂性
应用
汽车, 通用
地区供应
北美, 欧洲, 亚太
权利义务的法律声明
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.