Material datasheets available free. Online registration at: www.materialdatacenter.com
Freon - Refrigerant - The Chemours Company
Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.
A search for "Freon" in Material Data Center leads to the following information:
|
|
Material Data Center offers information about the following products with the requested tradename. To view a datasheet, please click on the relevant product.
...n (Fig.1). When it comes to cooling the mold, the variety of methods is relatively small Water-based systems are widely used and preferred for reasons of cost. More expensive and involved systems using a phase change in the coolant e.g., CO2 or freon) are rather rare. Engineering Aspects When evaluating the profitability of injection molding, cycle times play a decisive role. Thus it is natural to shorten, as much as possible, the individual times that add up to the total cycle time without im...
Additional information about this tradename, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.
Note: the information in Material Data Center was collected with maximum care, based on information from material producers. They are subject to short term changes at the market. There is no warranty for the correctness of this information. In no way this information can be seen as a legal advice, whether certain tradenames are protected or not.